Red frame indicates commercial suitability.

TECKNIT SHIELDING COMPONENTS

CONDUCTIVE O-SEALS - SILICONE ELASTOMER RINGS - O-SEALS are resilient rings of conductive silicone elastomer. They are available in round or rectangular cross sections and provide both shielding and sealing. TECKNIT CONDUCTIVE O-SEALS are designed for static applications in which the sealed surfaces do not move in relation to one another. They can be made from a variety of CONSIL materials. (See conductive elastomers)

EMC FOIL TAPES - CONDUCTIVE FOIL TAPE WITH ADHESIVE - EMC FOIL TAPE consists of copper or aluminum foil backed with a conductive acrylic pressure sensitive adhesive. This tape is ideal for sealing seams in EMI shielded rooms and cabinets, wrapping cable, static discharge draining, and grounding. It is also a practical repair material. The tapes meet MIL-T-47012. (SE): Copper 60 dB. Aluminum 55dB.

EMI CONNECTOR GASKETS - EMI FLANGE SEALS FOR ELECTRICAL CONNECTORS - CONNECTOR GASKETS provide shielding and environmental sealing between flanges and mounting bulkheads. A variety of materials can be manufactured into connector gaskets for both military and commercial applications. Materials include CONSIL® materials, plus TECKFELT TM, DUOLASTIC TM, TECKSPAN TM, and ELASTOMET®.

FUZZ BUTTON® - RESILIENT WIRE MESH CONTACTS - FUZZ BUTTONS are small, cylindrical, knitted wire mesh contacts. Standard metals employed are tin-plated phosphor bronze, monel, and silver brass. They are available in standard sizes ranging from .062" to .500" in diameter and height and are ideal for shielding and grounding computer enclosures. The buttons remain resilient and conductive after thousands of cycles.

TECKMASK TM TAPE - EMI FOIL TAPE WITH EASY PEEL MASK - TECKMASK Tape withstands the rigorous powder painting process used in sheet metal manufacturing while eliminating expensive plating, hand masking, and chromate coating. After painting and baking, the mask is removed, leaving a clean conductive surface and smooth paint edge overlapping the foil. Widths are .43" TO 2.0". (SE) >114 @ 10 MHz; > 115 @ 1 GHz.

FORM-IN-PLACE GASKETING - SILVER-PLATED COPPER FILLED SILICONE - FORM-IN-PLACE GASKETING is inherently a custom process that is ideal for the performance requirements and cost demands of commercial applications. The gasket material is silver-plated copper filled silicone that cures to form a flexible EMI shield and environmental seal. (SE) > 75 dB @ 10 MHz; > 70 dB @ 1 GHz.

[Tecknit Home |Short Form Home | Next Page | Previous Page | Last Page] For more information visit: http://tecknit.com