TECKNIT WIRE MESH GASKETS Red frame indicates commercial suitability.

MESH STRIPS - KNITTED WIRE MESH MATERIALS - MESH STRIPS provide EMI shielding at the joints and seams of electronic enclosures. Cross sections are rectangular, round, round with fin (to simplify mounting) and double round with fin. Standard materials are tin-plated phosphor bronze, tin-coated copper-clad steel, silver-plated brass, monel, and aluminum. Shielding Effectiveness (SE): >130 dB @ 10 MHz; >110 dB @ 1 GHz.

CUSTOM STRIPS - WIRE MESH KNITTED OVER ELASTOMER CORE - CUSTOM STRIPS combine the resiliency and conductivity of knitted wire mesh with the excellent compression and deflection characteristics of sponge elastomer. Custom strip gaskets consist of two covers of knitted wire mesh over a core of either neoprene, silicone closed-cell sponge, or low closure force elastomer tubing. (SE): >130 dB @ 10 MHz; >110 dB @ 1 GHz.

EMC SHIELDING TAPE - THIN STRIP OF KNITTED WIRE MESH - EMC SHIELDING TAPE is a double layered strip of knitted wire mesh and is ideal for shielding electronic cables and cable assemblies. The one inch tape is supplied in 25' & 100' rolls and on spools up to 2500 feet. The standard tape material is tin-coated copper-clad steel. Available by special order in different widths and materials. (SE):> 60 dB @ 10 MHz; >40 dB @ 1 GHz.

TECKMESH TAPE - SHIELD AND SEAL WIRE MESH - TECKMESH is a flexible EMC tape for shielding and sealing connecting cables and harnesses. It is constructed of knitted wire mesh for shielding and a thin silicone elastomer for sealing. The silicone sealing material fuses on contact with itself. No adhesives, clamps, or special tools are required for cable or harness wrapping or curing. (SE): >60 dB @ 10 MHz; >40 dB @ 1 GHz.

SEAMLESS KNITTED WIRE - DIE-COMPRESSED WIRE GASKETS - SEAMLESS KNITTED WIRE is formed by die-compressing a controlled amount of knitted wire mesh. The gasket contains no joints or splices. Although most applications involve rings, gaskets can be produced in rectangular and special shapes, with holes or mounting recesses, corner radii, and other custom features. (SE): >130 dB @ 10 MHz; >110 dB @ 1 GHz.

CUSTOM KNITTED WIRE - CUSTOM MESH GASKETS - CUSTOM KNITTED WIRE MESH gaskets are made from combinations of wire strips (rectangular, round, double core, and round with fin) and custom strips (mesh knitted over sponge or hollow cross section elastomer core constructions). Mesh knitted over various core materials can be used in high temperature and microwave applications. (SE): >130 dB @ 10 MHz; >110 dB @ 1 GHz.

DUOGASKETS TM /DUOSTRIPS TM - WIRE MESH WITH ELASTOMER SEAL - DUOGASKETS / DUOSTRIPS are made of knitted mesh and elastomer to provide shielding and environmental sealing. Optional:adhesive back. Disc or washer-type stops minimize over compression. DUOGASKETS are ideal for sealing enclosure doors and covers, and for mounting shielding windows and vents. (SE): >130 dB @ 10 MHz; > 100 dB @ 1 GHz.

TECKSTRIP® - KNITTED WIRE MESH WITH EXTRUDED STRIPS OR FRAMES - TECKSTRIP is wire mesh (with or without rubber) crimped into an aluminum frame. They can be supplied in a ready-to-mount frame or in custom or bulk lengths. Easily attached to an enclosure by spot welding, bolting, or riveting. Frames can be supplied unfinished, chromate finished, or painted to specification. (SE): >130 dB @ 10 MHz; >100 dB @ 1 GHz.

DUOSIL® - EXTRUDED STRIP OF WIRE MESH AND SILICONE - DUOSIL is composed of silicone and mesh to provide an EMI shield and environmental seal. It is produced by allowing a controlled amount of elastomer to penetrate the porous face of the shielding strip. The result is a composite of both materials. Ideal in severe environments, it is perfect for installation in narrow groves. (SE): >130 dB @ 10 MHz;>100 dB @ 1 GHz.

[Tecknit Home | Short Form Home | Next Page | Last Page] For more information visit: http://tecknit.com