TECKNIT CONDUCTIVE SYSTEMS - Red frame indicates commercial suitability.

CONDUCTIVE ADHESIVES - ONE-PART SILVER-FILLED RTV - TECKNIT RTV CON / RTV-1 is a pure silver loaded, one component RTV silicone adhesive-sealant. It is available in a 2 ounce tube and it is ready for immediate use without mixing. TECKNIT RTV / RTV-1 cures quickly at room temperature and on exposure to air moisture it will form a flexible, resilient, and conductive bond. Volume Resistivity = 0.01 OHM - CM.

CONDUCTIVE ADHESIVES - TWO PART SILVER AND NICKEL FILLED RTV - These adhesives are conductive, medium viscosity systems with either silver or nickel filled glass particles. Each is formulated with a special conductive material producing its own unique advantages. The resultant bond or seal of each conductive system is flexible and resilient. Volume Resistivity = 0.01 OHM - CM (Silver Glass); 0.1 OHM - CM (Nickel).

TECKBOND TM -C - SILVER PLATED COPPER-FILLED SILICONE ADHESIVE - TECKBOND-C is a silicone based system filled with silver-plated copper particles to produce a conductive one-component adhesive sealant. It is an RTV moisture-cured compound ready to use without preparation or mixing. The compound cures at room temperature to form a resilient conductive bond / sealant. Volume Resistivity = 0.04 OHM - CM.

TECKBOND TM -NC - ONE PART NICKEL COATED GRAPHITE FILLED SILICONE RTV - TECKBOND-NC is a conductive silicone adhesive sealant RTV filled with nickel coated graphite particles. Ready to use without mixing, it moisture cures at room temperature to produce a flexible, resilient conductive waterproof bond. Meets temperature requirements from -55 through 200C. Volume Resistivity = 0.5 OHM-CM

ELASTO-BOND® - NON CONDUCTING ADHESIVE / RTV SEALANT - ELASTO-BOND is a ready to use non-conductive, single-component silicone-based adhesive and RTV sealant. ELASTO-BOND cures by reacting with the moisture in the air. It requires no mixing or preparation before using. It is recommended wherever flexible bonding and sealing are required between a metal surface and an ELASTOMET or ELASTOFOAM gasket.

CONDUCTIVE CAULKING - SILVER FILLED FLEXIBLE RESIN CAULKING SYSTEMS - CAULKS consist of four conductive one-component systems filled with silver coated or silver-plated copper particles providing over 100 dB shielding. Safe to handle, easily applied, and free of corrosive binders they improve joint / seam integrity for electronic enclosures. Volume Resistivity ranges from 0.0005 OHM - CM to 0.01 OHM - CM.

CONDUCTIVE EPOXY - SILVER-FILLED SYSTEMS FOR JOINING, BONDING AND SEALING - TECKNIT EPOXIES are two-part resin systems consisting of epoxy and hardener filled with either silver-coated inert particles or pure silver. When mixed, the components produce an easily applied, creamy paste. These systems are safe, non-volatile, and non-toxic. Volume Resistivity ranges from 0.001 OHM - CM to 0.02 OHM - CM.

CONDUCTIVE GREASE - ELECTRICALLY CONDUCTIVE SILVER-FILLED GREASE - TECKNIT GREASE is a one-component conductive silicone grease filled with silver-coated particles. Maintains a conductive path between contact surfaces which are free to move. The grease can be applied at elevated operating temperatures to vertical and overhead surfaces with no dripping or running. Volume Resistivity is 0.02 OHM - CM.

CONDUCTIVE COATINGS - SILVER FILLED PAINTS - TECKNIT COATINGS are organic-type conductive acrylic and polyurethane paints filled with silver. They can be applied by brushing, spraying, dipping, or rolling and are a cost effective method for shielding and grounding plastic enclosures. Surface Resistivity ranges from 0.5 OHMS / SQ to 1.0 OHMS / SQ.

[Tecknit Home |Short Form Home | Next Page | Previous Page | Last Page] For more information visit: http://tecknit.com